Types Of Wood Material By IDEA
IDEA specializes in the design, manufacture and sales of a range of stylish outdoor wood & metal products, including urban, park & garden furniture.
TYPES OF WOOD MATERIAL BY IDEA
PINEWOOD: Impregnated with TANALITH E®
Tanalith is the first impregnation agent in compliance with the European Biocidal Product Regulation. Purchased from a certified supplier.
HARDWOOD: Iroko
IDEA selects hardwood, according to the request of the clients and market availability.
GLUE LAMINATION: Glulam of Pinewood:
Glue-laminated Pinewood timber is a structurally engineered wood product commonly used for beams and columns.
• Wood glued with industrial adhesives, is highly durable and moisture-resistant.
• Glulam is stronger than steel at comparable weights.
• Capable of generating large pieces and unique shapes. That makes glulam a cost-effective choice for long structural spans and tall columns with minimal need for additional support.
IMPREGNATION TANALITH E®: PINEWOOD:
It is an environmental and human-friendly impregnating agent, contains azole compounds that have no harm to humans and environmental health.
• Provides higher protection against cooper tolerant fungi, termite damage.
• Prolongs the life of the timber.
• TANALITH is odorless.
• No change in the final dimensions of the wood.
WATER-BASED PAINT:
This finish is excluded from most types of hardwood. It is a complete finish eliminating if desired the need for a separate primer or undercoat and providing low maintenance and long-term protection. It is certified by the "EN 71-3 Safety for Toys" standard.
PAINTING CYCLE:
1. Timber surface should be dry, well sanded with no:80-120 Sandpaper and dust must be cleaned.
2. Manual application of the first coat by brush (can be diluted with 10% of water if needed).
3. Drying 16 hours.
4. Sand the surface with no: 180-220 sandpaper and apply the second coat.
4. Drying 16 hours.
WOODEN OIL:
It is the best treatment for both soft and Harwood we use.
• Beautiful natural finish and non-film forming
• Increased resistance to UV, Water repellent.
• One-coat protection.
Wood surfaces treated with oil naturally tend to turn gray in a variable period of time.It is a physiological reaction and is self-protection of wood against weathering while not affecting the quality of the product. Regular renewal of the oiling process is suggested.
Cycle for Oiling:
1 Manually apply the first coat with a brush and remove the excess oil by cloth.
2. Wait 24 hours to complete dryness.
3. Visual quality control.
MAINTENANCE:
On wood elements, IDEA offers a warranty against rot. For aesthetic and functional reasons IDEA requires semiannual maintenance of wood surfaces with the oil. On this condition, we provide 2 years warranty on the looks of the products. Proceed to lightly sand to remove a deposit of dirt, and apply a new layer of oil. In case of products that require complete repainting. Sand the Surface with no: 180-220 sandpaper, then removes the dust. The surface should be clean and non-oily and dry. Apply 1-2 coats of water-based paint. The product must be ultimately left to dry. Aqua Wood Stain Paint and Wooden Oil for maintenance are available upon request.
